Rider
Outdoor Artist Rider (technical requirements for outdoor show)
How to make an outdoor show perfect:
✨ Bubbles love open space and calm air. Choose a spot without strong wind — soap magic will last longer
✨ Electricity nearby (220V) — to power music and special effects.
✨ Artist needs a clean, flat area of 15–25 m² (grass, tiles or asphalt are fine).
✨ Leave 2–3 meters between the audience and the “stage” so bubbles can fly and kids don’t step on the props too early
✨ Ideally there should be a place nearby where the artist can change and store props (dressing room, tent, utility room).
✨ Setup time about 40 minutes, breakdown 30 minutes.
✨ Parking for the vehicle with equipment should be as close as possible to the site.
Indoor Artist Rider (technical requirements for indoor show)
To make the show perfect, bubbles need a little help from you. Here are the simple
conditions:
✨ Quiet and still air:
Close windows and doors, switch off A/C and fans. Bubbles hate drafts — calmer air makes them live longer and look better.
✨ Clean space:
Artist needs 9–15 m² of free, flat surface (stage floor, tiles, parquet). More space = more tricks.
✨ Light & darkness:
Classic show works with normal lighting. Neon show needs darkness — the darker the better.
✨ Electricity:
220V outlet nearby (within 10m).
✨ Artist’s space:
A dressing room or small room to change and store props (a toilet is not suitable).
✨ Distance to the audience:
2–3 m.
✨ Setup time:
~40 minutes; breakdown ~30 minutes. If the hall is occupied, part of the setup can be done in an adjacent room (final touches 10–15 minutes).
✨ Special effects note:
Many tricks use white smoke bubbles. It may be necessary to
temporarily disable smoke detectors — only if permitted by safety rules.
✨ Parking:
A space near the entrance for the vehicle with props — so bubbles don’t have to
walk 😉